ATOLL Electronique PR200 Signature Preamplifier


A high end preamplifier with a Toroidal transformer and capable of double-mono configuration

The PR200 Signature belongs to the range of preamplifiers and power amplifiers offered by Atoll. This preamplifier represents the modularity and the power that Atoll wants to put forward: a wide range of combinations and a considerable source of improvements.

Atoll Electronique has been making high end amplifiers since the 1990’s. The new PR200 Signature revised the classic PR200 preamplifier to bring it up to spec to modern times. While designed to be the perfect match for other 200 Signature series Atoll products, the PR200 preamp is a solid preamplifier in its own right. With a power supply section using a 340 VA toroidal transformer and a current capacity of 32,914 µF the PR 200 has exceptional dynamics from bass to treble.

The original scheme has been revised to improve the musicality and connectivity of those models. The quality of many components has also been improved: PCB with double layer nickel/gold, link capacitors, heat sinks, thermal protection.


  • Audio stages with discrete components, MKP technology link capacitors
  • PCB with double layer nickel/gold, thermal protection
  • Toroidal Transformer of 340 VA
  • ALPS motorised potentiometer
  • Direct access of inputs from the front panel or the remote control

Atoll PR200 Signature: Analog Design

The Atoll Electronique PR200 Signature Preamplifier adopts a purely analog design. It provides five analog inputs on its rear panel to connect all your sources such as a CD player, an audio DAC, an amplified turntable, an FM tuner, etc. Practical, a By-Pass input is also present to connect a pre-amplified source. Connecting the Atoll PR200 Signature preamp is made easy with a dual RCA stereo output. Two power amps can thus be used simultaneously with this Atoll preamplifier.

Atoll PR200 Signature Stereo Hi-Fi Preamplifier

The Atoll Electronique PR200 Signature Preamplifier is equipped with 5 analog inputs and two RCA outputs. The Atoll PR200 Signature hi-fi preamp is upgradeable and can receive the Atoll S/PDIF DAC card as well as the Atoll P50 and Atoll P100 pre-amp cards.

Optional Board Addons

  • Phono Stage (MM)
  • Phono Stage (MM/MC)


  • 5 audio Inputs (RCA) :
    • AUX ( or optional phono stage P50 or P100)
    • CD
    • TUNER
    • TAPE (IN+OUT with monitoring loop)
    • DVD
  • 1 By-pass Input (using as power amplifier)
  • 2 Pre-out Outputs (for bi-amp or to link to a subwoofer)
  • 1 Headphones jack 6,35mm
  • 1 trigger Output 12V
  • Power supply (VA): 340
  • Total of capacitors (µF): 32 914
  • Inputs: 4 + 1 monitor
  • Input Impedance (kΩ): 357
  • Sensibility (mV): 100
  • Rising Time (µs): 2.5
  • Signal/Noise Ratio (dBA): 100 dB
  • Bandwidth: 5 Hz – 100 kHz
  • Weight: 8 Kg
  • Dimensions: 440 x 90 x 300 mm

Check out the manual for more detailed information – Atoll Electronique PR200 Signature Manual



Black, Silver

Scroll to Top