Vincent SV-500 Integrated Amplifier

$2,499.00

Timeless design and with the typical Vincent sound characteristics

On the basis of the established SV-227, Vincent have developed this amplifier. With a little less output power, but with a similar timeless design and with the typical Vincent sound characteristics the SV-500 is presented. The SV-500 does not only look similar to its big brother, but also works with similar circuit inside. The tubes’ assembly, however, has been altered. Audio signals are processed by two 6N1 tubes, one 12AX7 tube and amplified by four Toshiba transistors at the output.

A different 110 Watts toroidal transformer comes into operation as well. Two condensators for grading of electric power and caching have 20,000 uF. The SV-500 is supplied with 4 analogue (RCA) and 2 digital (optical and coax) inputs for different sound sources. In addition to that, the SV-500 has a pre-output and a rec-output that provide for a subwoofer and/or recording equipment. An aluminium remote control is included and adds to the classy designer look.

Specifications…

  • Frequency Response: 20 Hz – 20 kHz +/- 0.5 dB; 20 Hz – 50 kHz +/- 2 dB
  • Nominal Output Power RMS/8 Ohm: 2 x 50 Watt
  • Nominal Output Power RMS/4 Ohm: 2 x 80 Watt
  • Input Sensitivity: 420 mV
  • T.H.D.: < 0.1% (1 kHz, 1 Watt)
  • Signal-Noise Ratio: >90dB
  • Input Impedance: 47 kOhm
  • Inputs: 4 x Stereo RCA, 1 x Optical, 1 x Coax
  • Outputs: 1 x Stereo RCA Rec Out, 1 x Stereo RCA Pre Out, 2 x Power Control, 2 x 2 Speaker Terminal
  • Playable Digital Formats: WAV, FLAC, APE, LPCM, MP3, ACC, AC3, WMA
  • Tubes: 1 x 12AX7, 2 x 6N1
  • Colour: Black or Silver
  • Weight: 10kg
  • Dimensions (W x H x D): 430 x 118 x 375 mm

Check out the manual for more detailed information – Vincent SV-500 Manual

Brand

Colour

Black, Silver

Scroll to Top